Kaufen Sie W070572-HYP von Pulsafeeder in Österreich

KOP Kit (Service Kit) for Pulsafeeder 8480 pump, B871781 (Repairkit Pump Head) contents: Piston Seal Valve Ball O-Ring, Diaphragm, flat, Valve Seat, 0,75" Seal oil & Gasket head

Dosierpumpe Pulsatron, Serie A plus, Förderleistung 1,9 Liter / Std.(0,50 Gal./Std.), 125 Hübe / min, max. Ausgangsdruck 7,0 bar (100psi). Dosierkopf aus PVDF, Ventilsitze PTFE, Ventilkugel Keramik. Anschlüsse: 1/4" ID x 3/8" AD Schlauchanschluss. Antrieb: 230V, 50 / 60 Hz. CE-Zertifikat Stückgewicht: 4,500 kg

Dosierpumpe Pulsatron, Serie A plus, Förderleistung 3,8 Liter / Std.(1,0 Gal./Std.), 125 Hübe / min, max. Ausgangsdruck 7,0 bar (100psi). Dosierkopf aus PVC, Ventilsitze PTFE, Ventilkugel Keramik. Anschlüsse: 1/4" ID x 3/8" AD Schlauchanschluss. Antrieb: 230V, 50 / 60 Hz.

(Metering Pump PULSAtron Series Aplus 1,00GPH / 24 GDD / 3,8 LPH, 125SPM, 100PSI (7,0 bar) 230VAC, 50/60 Hz, PVC Liquid End, PTFE Seats, Ceramic Balls, 0,25" ID x 0,38" OD Tubing Connections)

PULSAtron Electronic Metering Pump, Serie C plus

PULSAtron Electronic Metering Pump, Series E PLUS max. Delivery: 0,25 GPH / 0,9 Liter/hour max. Pressure Head: 150psi (10 bar) 125 strokes/min. Liqiod End material: PVC head, TFE diaphragm, ceramic balls. Connection sizes: .25"I.D. x .38"O.D. / .25"ball Electrical: 115Volt, 50-60Hz, 4-20mA DC Direct, w/Stop, CE Approval Pump dimensions: 5" x 10" x 11" Boxed dimension: approx. 25 x 30 x 30 cm

(Pulsatron Metering Pump, Series E Plus, max. delivery: 5GPH, 120GPD (18,9 Liter/hour) max. working pressure: 100psi (7,0 bar) Manual ON/OFF, manual stroke control 0-100%, Pressure head glassfilled Polypropylene, Diaphragm PTFE, valve balls ceramic, .38 Dia. Tubing: .38"ID x .50"AD Electrical: 230Volt, 50-60 Hz, 1ph, 1,8m 3-wire)

Dosierpumpe Pulsatron, Serie E plus, Förderleistung 2,3 Liter / Std.(0,6 Gal./Std.), 125 Hübe / min, max. Ausgangsdruck 7,0 bar (100psi). Dosierkopf aus PVC, Ventilsitze PTFE, Ventilkugel Keramik. Externe Ansteuerung, mit Stopp Anschlüsse: 1/4" ID x 3/8" AD Schlauchanschluss. Antrieb: 230V, 50 / 60 Hz. Stückgewicht: 5,850 kg

Controller

Controller

MicroTrac cooling tower controller, Enclosure: NEMA 4X / IP65 • Dimensions: 6.44 x 3.2 in (163 x 82 mm) • Power Supply: 90 VAC / 50/60Hz / 5A; 250 VAC / 50/60Hz / 5A • Control Output: Line Voltage @240VA per Relay (2 Amps @ 120VAC) • Display: LCD • Set Point Range: 0 – 9,999 μS/cm • Set Point Differential (Hystersis): Fixed 5% below the set point

Flacher Pulsar

Controller, Microtrac, 230 Volt for Water Treatment in cooling towers

TAG.NO/Sr No/Model No : MP-RW641-P062 / N.A / 18AM02 MP-RW641-P058 / N.A / RPHB EM80-315/2 MP-RW641-P064 / N.A / 18AM02 PR Number : 11422830 RMC RTF-MEC 6 2000305469 RING,RETAINING Parts for gear pumps : Drawing & Item Number : GMH6-ACE-KLP/11 MANUFACTURER : PULSAFEEDER MANUFACTURER : ROPER PUMPS Old part number : 46710 Old part number : 46711

Diaphragm Metering Pump, Pulsa Series 880, Model # 880-S-E, Pump Head from StSt 316L, PTFE flat diaphragm, Viton O-ring seals, single ball valves, StSt 316L 6,73 Gal / hour (25,1 Liter / hour) 24,82 bar. Hydraulic Bypass Setting: 27 bar 1,125 Inch Piston, 0,5" NPT Connections, selfpriming Manual Stroke Length Control, Standard Motor (Factory Supplied), 1450 RPM, 0,5 HP, 230/400V, 3 ph, 50 Hz, Totally enclosed. Pump will be supplied with IEC 100 frame base Paint: Two Part Epoxy Green 880-S-E.. Unit weight: 40,000 kg

1). 25HJ Pulsar - this pump requires 0.25 kW. The motor mounting is by B14 flange. We can accommodate 63, 71 and 80 frames.

1). 25HJ Pulsar - this pump requires 0.25 kW. The motor mounting is by B14 flange. We can accommodate 63, 71 and 80 frames. 2). The vacuum style leak detection is no longer available. This replacement pump will be complete with pressure type leak detection.

1). 7440-S-E – this pump requires 1.1 kW to meet the maximum pressure rating. The motor mounting is by feet. I quoted the pump considering IEC 90 frame. If you need another size, please advise.

Pump-and-motor assembly Pulsafeeder metering pump model 880H-S-E, ½” X ½” female NPT port size, 316 stainless steel liquid end material, 1” dia. Teflon tube diaphragm, 1.5” piston diameter, 0.625” stroke length, 1 piece– ½” ball for each suction and discharge, capable of delivering 30 gph against 200 psig. Pump is directly coupled to a ¾-hp, 1750-rpm, 230/460-V, 3-phase, TEFC, 56-frame size, 60-Hz motor

Pump-and-motor assembly Pulsafeeder metering pump model 680-S-E, ½” X ½” female NPT port size, 316 stainless steel liquid end material, flat diaphragm, 1.125” piston diameter, 0.50” stroke length, 1 piece – ½” ball for each suction and discharge, capable of delivering 9.88 gph against 100 psig. Pump is directly coupled to a ¾-hp, 1750-rpm, 230/460-V, 3-phase, TEFC, 56-frame size, 60-Hz motor

Locking Assembly

Rectangular duct fans

Rectangular duct fans

Rectangular duct fans