0069.01.33 (150 MM BREIT, 10 µM) - Erichsen Österreich  Verkauf

Marke Erichsen
Produkt 0069.01.33 (150 MM BREIT, 10 µM)
Beschreibung (Einzel-Spiralen zum Modell 358)
Interner Code IMP3366
Gewicht 1

Bitte kontaktieren Sie uns, um Preis und Lieferzeit für Erichsen - 0069.01.33 (150 MM BREIT, 10 µM) (Einzel-Spiralen zum Modell 358) zu erhalten. Wir können Sie auch für andere Modelnummern beraten. Wir versuchen auf den deutschen Industriemarkt den besten Preis und Lieferzeit für Sie in Erfahrung zu bringen.

Wir vertreiben nur neue und originale Produkte.

Unser Unternehmen ist kein autorisierter Händler. Alle Rechte liegen bei den Herstellern und ihren offiziellen Partnern.

Gleiche Produkte der Erichsen

DIN 53 211

DIN 53 211, SIS 184115, SNV37 11 REFERENZKLASSE”aus Leichtmetall, mit Düsen-Ø 4 mm

00620531

Order number: 0062.05.31

HÄRTEPRUFSTAB, MODELL 318

Härteprüfstab, Modell 318 einschl. Prüfspitze Nr. 1 (nach Bosch, 0,75 mm Ø) und 3 Federn Best.-Nr.0020.01.31

K HAND COATER 620 (LARGE)

Order number: 0620.02.51

K HAND COATER 620 (SMALL)

Order number: 0620.01.51

KUGELSCHLAGPRUFGERÄT MOD. 304

Fallkörper: 2 pounds, Skala/Teilung: 80/2 inch pounds, Ø Kugel/Matrize: 5/8" / 0.64"

MEHRSCHNEIDENGERÄT 295/I

mit 6 Schneiden und Schnittabstand

MODEL 295 / V

Cutting element

MODEL 322

Tauch-Auslaufbecher in Anlehnung an DIN ISO 2431 mit Düsen-Ø 6 mm

0096.01.31

Mark Tester

MODELS 295/II, 295 / X

Cutting element

MULTI CUTTING DEVICE 295 / I

with 6 blades and cutting distance 1 mm for cross-cut tests according to EN ISO, ISO, VDA, EN, with magnifier, Polyamide bristle brush and plastic case

Mehrschneidengerät 295/I

mit 6 Schneiden und Schnittabstand

NASSSCHICHTDICKENMESSER 433

ISO 2808, BS 3900:C5 4 Teilmessbereiche: 5 - 100 μm ( 5 μm Skalenteilung) 100 - 300 μm (10 μm Skalenteilung) 300 - 700 μm (20 μm Skalenteilung) 700 - 1500 μm (40 μm Skalenteilung

ORDER CODE: 0218.01.32

Diamond probe according to DIN EN 438-2 and ISO 4586-2 (Cone angle 90 °, tip radius 90 microns)

ORDER NO. 0004.01.31 SHEET METAL TESTING MACHINE, MODEL 100

with manual operation, maximum drawing force 30 kN and compliance with the standard constant adjustable blank holder pressure max. 10 kN, with Tiefungsanzeige by counter with 0.1 mm Reading accuracy as well as a testing tool no. 27 by EN ISO 20482; for checking the drawability of sheet metal and bands from 0.1 to 1.5 mm thick (about 400 N / mm² tensile strength) in widths from 13 to 90 mm, by the Erichsen cupping test according to EN ISO, EURONORM, BS, NF, GOST, UNI, UNE. Weight: approx 36 kg net Dimensions: 340 x 350 x 450 mm (L x W x H)

ORDER NO. 0012.01.31 MODEL 102 SHEET METAL TESTING MACHINE

with electro-hydraulic drive, max. Pulling force of 60 kN and automatic test sequence with a stop at specimen failure (from 0.3 mm sheet thickness), for testing of sheet and strip any kind of pressure -, punching and deep drawing ability by means of the I. Erichsen cupping test according to EN ISO, EURO NORM, BS, NF, GOST, UNI, UNE, II. Bore Expanding sample (KWI) to Siebel and Pomp. The testing machine is equipped with automatic shut-off device and delay automatic execution in accordance with Technical Description 102 / D, a Cupping Tool No.. According to 27 EN ISO 20482 as well as a filling hydraulic oil equipped. Power supply: 400 V three-phase, 50 Hz, 1 kW (other voltages on request) Weight: about 280 kg net Dimensions: 650 x 680 x 1125 mm (L x W x H)

ORDER NO. 0044.03.31

Film Applicator System Wasagasse 288 "REFERENCE CLASS" with film width 180 mm, gap heights + 150 microns 200 microns (please specify when ordering)

ORDER NO. 0044.04.31

Film Applicator System Wasagasse 288 "REFERENCE CLASS" with film width 230 mm, gap heights + 150 microns 200 microns (please specify when ordering)

Order No. 0100.01.31 model 463

Sikkens scratching tool

Nr: 03010131, Modell 494 MC

Waschbarkeits- und Scheuerprüfgerät

ORDER NO. 0564.01.32

Probe for the model 295/XIV

910926442

Sikkens Schneid egde

ORDER.NO. 0062.02.31 MODEL 321

Immersion flow cup with nozzle Ø 4 mm

ANFRAGE SENDEN